5/32 in. (0.156) White HDPE Plastic Resin Balls
ITEM #
1800.156WH
High-density polyethylene (HDPE) is a polyethylene thermoplastic made from petroleum.
The mass density of high-density polyethylene can range from 0.93 to 0.97 g/cm³. Although the density of HDPE is only slightly higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. The differentiation in strength exceeds the difference in density, giving HDPE a higher specific strength. Also it is harder and more opaque and can withstand to some extent higher temperatures (120ºC/ 248ºF for short periods, 110ºC/ 230ºF continuously). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions.
The mass density of high-density polyethylene can range from 0.93 to 0.97 g/cm³. Although the density of HDPE is only slightly higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. The differentiation in strength exceeds the difference in density, giving HDPE a higher specific strength. Also it is harder and more opaque and can withstand to some extent higher temperatures (120ºC/ 248ºF for short periods, 110ºC/ 230ºF continuously). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions.
| Specifications | |
|---|---|
| Color | White |
| Material Resin | HDPE |
| Size (Fraction) | 5/32 in. |
| Size (In) | 0.156 |
| Size (mm) | 3.969 |
| Tolerance (+/-) | 0.002 |
| Density | 0.95 |
| Max Operating Temperature (C) | 82 |
| Tensile Strength | 4600 |
| Durometer/Hardness Rating | 69D |
| Minimum Order | 1 |
| Units Per Package | 1 |