1/8 in. (0.125) Natural HDPE Plastic Resin Balls

1/8 in. (0.125) Natural HDPE Plastic Resin Balls

ITEM #
1800.125
High-density polyethylene (HDPE) is a polyethylene thermoplastic made from petroleum. 

The mass density of high-density polyethylene can range from 0.93 to 0.97 g/cm³. Although the density of HDPE is only slightly higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. The differentiation in strength exceeds the difference in density, giving HDPE a higher specific strength. Also it is harder and more opaque and can withstand to some extent higher temperatures (120ºC/ 248ºF for short periods, 110ºC/ 230ºF continuously). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions.
Specifications
Color Natural
Material Resin HDPE
Size (Fraction) 1/8 in.
Size (In) 0.125
Size (mm) 3.175
Tolerance (+/-) 0.002
Density 0.95
Max Operating Temperature (C) 82
Tensile Strength 4600
Durometer/Hardness Rating 69D
Minimum Order 1
Units Per Package 1