1/2 in. (0.5) Red HDPE Plastic Resin Balls
ITEM #
1800.500RD
High-density polyethylene (HDPE) is a polyethylene thermoplastic made from petroleum.
The mass density of high-density polyethylene can range from 0.93 to 0.97 g/cm³. Although the density of HDPE is only slightly higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. The differentiation in strength exceeds the difference in density, giving HDPE a higher specific strength. Also it is harder and more opaque and can withstand to some extent higher temperatures (120ºC/ 248ºF for short periods, 110ºC/ 230ºF continuously). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions.
The mass density of high-density polyethylene can range from 0.93 to 0.97 g/cm³. Although the density of HDPE is only slightly higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. The differentiation in strength exceeds the difference in density, giving HDPE a higher specific strength. Also it is harder and more opaque and can withstand to some extent higher temperatures (120ºC/ 248ºF for short periods, 110ºC/ 230ºF continuously). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions.
Specifications | |
---|---|
Color | Red |
Material Resin | HDPE |
Size (Fraction) | 1/2 in. |
Size (In) | 0.5 |
Size (mm) | 12.7 |
Tolerance (+/-) | 0.002 |
Density | 0.95 |
Max Operating Temperature (C) | 82 |
Tensile Strength | 4600 |
Durometer/Hardness Rating | 69D |
Minimum Order | 1 |
Units Per Package | 1 |